9″ Anglo Saxon Broken Back Seax Blade 945


Patterwelded steel 9 inch broken back seax

• Blade dimensions: 9 inches long + tang and 1 1/2 inches wide, 5.7mm at the broken back and 5mm at the handle
• Blade material: 15N20 Carbon Steel and CS80 and EN42J carbon steel, vintage wrought iron

You must be over 18 years old to purchase an edged tool from this website

Out of stock


This blade is a 6 bar construction. Deeply etched. First a layer of wrought iron at the spine and then a layer of twisted steel then another layer of wrought iron, and another twist , another layer of wrought iron and finally an edge of random pattern damascus. This is made using the same techniques that are used in the making of legendary Saxon and Viking swords.

Broken back seax blades have a very distinctive and stylised geometry, where the blade is thicker at the broken back and tapers towards the tip and back towards the handle. The Anglo Saxon broken back seax is the iconic tool and weapon of the Saxon. And found almost exclusively in the UK. Historically the blades have lots of subtle differences in profile but often share communality with the broken back part of the blade being the thickest.

Please email if you would like a quote for me to handle and sheath this blade.