7″ Anglo Saxon Patternwelded Broken Back Seax ref:929

£580.00

7 inch patterwelded steel broken back seax

• Blade dimensions: 7 inches long and 1 1/2 inches wide 6.4mm at the broken back and 5.3 mm at the handle.
• Blade material: 15N20 Carbon Steel and CS80 and EN42J carbon steel.
• Handle: elm, copper and the sheath is leather and copper.

You must be over 18 years old to purchase an edged tool from this website

In stock

Description

This blade is a 7 bar construction. First a layer of wrought iron at the spine, then a twist , then wrought iron and then a twist then wrought iron again, finishing with an edge of random pattern damascus. This has been made using the same techniques that are used in the making of legendary Saxon and Viking swords. Broken back seax blades have a very distinctive and stylised geometry where the blade is thicker at the broken back and tapers towards the tip and back towards the handle.

The long burl elm handle has a copper ferrule at the front.
The sheath is made from whet fitted vegetable tanned leather and has copper fittings.