10″ Anglo Saxon Patternwelded Broken Back Seax Blade 002

£465.00

Patterwelded steel 10 inch broken back seax

• Blade dimensions: 10 inches long + tang and 1 1/2 inches wide, 5 mm at the broken back and 4.3 mm where the blade meets the tang
• Blade material: 15N20 Carbon Steel and CS80 and EN42J carbon steel, vintage wrought iron

You must be over 18 years old to purchase an edged tool from this website

Out of stock

Description

This blade is a 4 bar construction. First a layer of wrought iron at the spine and then , 2 bars of twisted patternweld. The bars are tri colour, two grey steels and one bright it is a bold and striking pattern. Finally there is an edge of random pattern damascus. Folded to 300 layers. This is made using the same techniques that are used in the making of legendary Saxon and Viking swords.

Broken back seax blades have a very distinctive and stylised geometry, where the blade is thicker at the broken back and tapers towards the tip and back towards the handle. The Anglo Saxon broken back seax is the iconic tool and weapon of the Saxon. And found almost exclusively in the UK. Historically the blades have lots of subtle differences in profile but often share communality with the broken back part of the blade being the thickest.

Please email if you would like a quote for me to handle and sheath this blade.